4x1 4K 18Gbps HDMI switcher with KVM and audio output The 4x1 4K 18Gbps HDMI switch PT-SW-HD41USB distributes four HDMI v2.0 input signals to one HDMI output with full 18Gbps bandwidth for resolutions up to 4K@60Hz (4:4:4) including HDCP 2.2 and HDR up to Dolby Vision. In parallel to the four HDMI input signals, three USB-A peripherals can be switched to four USB-B ports. This means that one set of peripherals can be used in four locations. The HDMI signals are automatically detected and switched based on the 5V signal or the active TMDS stream, while the corresponding USB-B port follows the switching. In addition, four breakout connections are available for four PT-IFP-HU connection panels (not included), which forward the USB-B and HDMI connections from the switch and provide additional control functions. Analog audio output and control functions via front panel buttons and RS232 are also available. PureTools - High-quality electronic products for commercial applications The PT-SW-HD41USB 4x1 4K 18Gbps HDMI switcher is designed for parallel switching of HDMI and USB signals. Four HDMI inputs can be switched to one HDMI output - with full HDMI v2.0 bandwidth of up to 18Gbps for resolutions of up to 4K@60 (4:4:4). All standards of the HDMI v2.0 specification are supported, such as HDCP 2.2, HDR10 and Dolby Vision. In parallel to the four HDMI inputs, four USB-B ports are available for connecting to the respective HDMI source device, such as a PC or laptop. These can receive the signals from three USB-A ports on the switch, e.g. keyboard, mouse and webcam. The highlight here: the USB signals are switched with the HDMI signal. This means that every connected source device can access the peripherals whenever it is actively transmitting to the connected display device. This means that a single set of USB input devices can be used on four PCs/laptops. The USB ports transmit data according to USB 3.2 (Gen 1x1) at 5Gbps. In addition, the USB-A ports provide a maximum power supply of 1A per port, so that webcams or other power-hungry devices can also be integrated. The perfect configuration for conference rooms, control rooms or even smaller learning environments. In addition, the switch has four ports for integrating four PT-IFP-HU connection and control panels. These can be installed, for example, in a conference room at the four participant locations and offer the option of forwarding the HDMI and USB-B cables from the switch so that they can be integrated directly at the seat. The PT-IFP-HU interface plates also have two buttons for source selection and display image mute. The automatic switching function of the switcher can react to two different sub-signals of the HDMI inputs: the 5V line or the active TMDS signal. This can be set in the configuration of the switch. The USB-B signal follows the automatic or manual HDMI switching, so that the active participant always has access to the connected USB-A peripherals. The audio signal of the active HDMI input can be output analog as a 2-channel PCM signal via a 3.5mm jack. The output audio signal has a frequency range between 20Hz and 20kHz and a very low noise and crosstalk level. The maximum output power is >1kO, with up to ten parallel 10kO loads supported. The switch can be controlled via front panel buttons and RS232 and also has a micro USB connection for firmware updates and a screwable power connection. The system is therefore ideal for professional installations. PureTools - High-quality electronic products for commercial applications The PureTools range includes high-quality audio video;PureTools;PT-SW-HD41USB;281.74;449.9;IT products;Computer;PC accessories;No;No;https://shop.herweck.de/media/image/338894.jpg;19;0;1.24;4965.9;23.4;26.2;8.1;;;;0;0
338895;4251364734810;PureTools - HDBaseT 3.0 KVM Extender Set - USB-C/HDMI + USB data and Ethernet; PureTools - 2x2 HDBaseT 3.0 KVM Extender Set - 18Gbps (4K 60Hz 4:4:4) with HDR10, Dolby Vision and HDCP 2.2 support over HDBaseT and HDMI, HDMI and USB-C input with 60W PD, up to 6 USB peripherals and HDMI loop out on the TX side, HDBaseT 3. 0 output at full 18 Gbps up to 80m with bi-directional PoC, balanced audio on both endpoints and Ethernet pass-through, auto-sense, TCP/IP control, local/pass through RS232 control and dry contact switching. ;PureTools PT-PSW-21KVM 2x2 4K 18G HDBaseT 3.0 KVM Extender Set PT-PSW-21KVM is a professional 4K presentation switcher set including HDBaseT receiver. With its total of six USB inputs, devices such as KVM, cameras or storage media can be integrated on both the switcher and receiver side. The presentation switch uses the latest HDBaseT 3.0 protocol and is therefore able to distribute 4K signals at 18Gbps over up to 80 meters. On the input side, there is an HDMI-A connection with coupled USB-B input and a fully equipped USB-C v3.2 connection including 60W USB Power Delivery and DP Alt-Mode. In addition to the HDBaseT output, a mirrored HDMI output is available for local monitoring on the switcher. Both devices, i.e. switcher and receiver, can extract a symmetrical audio signal via a 5-pin Phoenix screw terminal. Only one of the two devices needs to be provided with a power supply thanks to bidirectional PoC. Various control functions are available: integrated push buttons and DIP switches on the front of the switcher, removable dry contact switches, RS232 local and pass-through, Ethernet pass-through and network integration via TCP/IP. PureTools - High-quality electronic products for commercial applications The PT-PSW-21KVM 4K HDBaseT presentation switcher with extender set consists of a presentation switch and receiver. It switches incoming HDMI and USB-C signals and passes them on to a receiver via HDBaseT or to a local HDMI output on the switcher. The HDBaseT connection according to the latest HDBaseT 3.0 standard is made with a conventional Cat. cable (preferably Cat.6a) and transmits 18G signals for 4K resolutions with max. 60Hz at 4:4:4 color subsampling and including HDR over up to 80 meters. Two input options are available on the input side of the switch. The HDMI input is connected to a USB-B port, which is switched at the same time and thus always reliably connects the control signals with the AV signal. In addition, a full USB-C port is available. This supports both the AV connection using DP Alt-Mode and the parallel Ethernet and data connection according to USB v3.2 standard and USB Power Delivery with up to 60 watts of power for simultaneously charging a connected mobile device. On the output side of the switcher there is an HDBaseT 3.0 output for connection to the receiver, as well as an HDMI output for local monitoring. In addition, a symmetrical audio signal can be output via a 5-pin Phoenix screw terminal. The receiver has an HDBaseT 3.0 input for receiving the signal from the switcher, as well as an HDMI output and also a symmetrical audio output with a 5-pin Phoenix connection. With a total of six connection options for USB devices on the switcher and receiver, many USB peripherals such as KVM, cameras, microphones or storage media can be integrated at both locations. There are two USB-A v3.2 ports on the switch itself. The receiver is equipped with three USB-A and one USB-C input according to the USB 2.0 standard. The latest HDBaseT 3.0 standard enables long-distance transmission of AV signals, 1G Ethernet, USB 2.0 and power with almost no delay. With a frequency of 594MHz, uncompressed AV signals according to the HDMI 2.0 standard with up to 4K@60Hz resolution and HDCP 2.2 encryption are transmitted up to 80 meters over just one cable. Both devices have a pass-through Ethernet connection so that an Internet signal only needs to be connected at one point in order to be able to access it at all locations. The switch has a TCP/IP connection for network integration, which can also be used to configure the set remotely in the local network. Both devices also have a USB firmware update connection